Powerglide Full Manual Valve Body Installation of this kit will eliminate any automatic features. The transmission will have to be manually shifted into all gears. This kit should be installed by someone familiar with automatic transmission repair and assembly. We recommend following a transmission Repair Manual for disassembly and www.doorway.ru Size: KB. · Just using the spacer (copper tube) is all that's really needed to convert to full manual shift, but other mods should also be made (higher pressure spring, drill out the separator plate, etc); the separator plate is what gets drilled out to pass more fluid through it, and only in two places (see shift kit instructions for which holes to enlarge). Shift transmission into reverse and let run approximately (3) minutes. Running in reverse (3) minutes will give any contaminants in the transmission, converter, cooler or lines a chance to settle into the transmission pan and not be introduced to the automatic shift control part of the valve body or governor, causing the shift valves to stick.
Just using the spacer (copper tube) is all that's really needed to convert to full manual shift, but other mods should also be made (higher pressure spring, drill out the separator plate, etc); the separator plate is what gets drilled out to pass more fluid through it, and only in two places (see shift kit instructions for which holes to enlarge). There's no such thing as a " Powerglide", unless you are referring to the cu in six that was bolted in front of it. GM did make a TurboHydramatic (TH), which is a three speed trans - a less capable version of the venerable TH The Powerglide has always just been called a Powerglide as far as I know. The Powerglide's short length and standard small-block Chevrolet bolt pattern on its bellhousing make it popular for its ease of adaptability. A Powerglide transmission in combination with a low rear gear is a good choice for quarter-mile cars or performance engines that live in the upper rpm limits.
POWERGLIDE TRANZ BRAKE VALVE BODY. (Manual Control Only) NOTE position of shift lever and manual make sure transmission level is on the add mark. TCI Powerglide Automatic Transmission Reverse Shift Pattern, Manual Valve Body and TCI has a wide variety available to pick from, making it easy to find. The detent hits the "rooster comb" which snaps into place with each gear. The pin is in the two grooves on the manual valve. That valve is what.
0コメント